东莞HFRR规格 HFRR耗材 诚信立足

北京朝阳高科应用技术研究所有限公司

The diesel lubricating high-frequency reciprocating tester controller is connected to the computer for the data line. No control chip, control module, and board card are installed in the computer chassis. Therefore, when the computer fails, the user can replace any other brand computer at any time. After installing the test operation software, you can use it.
The direct output of digital signals in the control process will not produce displacement changes in the process control, and will not be adjusted for the rest of the life.

Performance advantage of high frequency reciprocating tester for diesel lubrication evaluation of CMS-01
oftware system: Test operation interface can be obtained at any time ISO 12156.1-2018 standard standards for the environment(temperature, relative humidity) standard graphics; The software control platform can also automatically control, collect data, monitor data in real time, calculate data, form reports, calibrate parameters, and browse data after testing. After the grinding spot photo measurement, the grinding picture can be embedded into the test report to form a complete test report. The illustration is as follows:
In 2016, Beijing Gaoke, as a manufacturer of high frequency reciprocating test machines for diesel lubrication evaluation, participated in the drafting of the national standard(standard number: GB/T 3537-2017) for high frequency reciprocating test machines for diesel lubrication evaluation. The standard was issued on December 29, 2017. Implemented on July 1, 2018.
Performance advantage of high frequency reciprocating tester for diesel lubrication evaluation of CMS-01
stroke control: 1mm ± 0.005mm, using a reflective photoelectric encoder(grid ruler) to avoid adjustment for life. (Other domestic and foreign products of the same kind must be regularly calibrated and the operation methods are complicated. )

Overall requirements:
According to the ISO 12156.1-2018 ASTM D6079-2018 test method, used for the lubrication performance evaluation test of diesel engine fuel(including diesel fuel containing lubrication performance modifiers). The operation of the automatic constant temperature and humidity system is simple and easy, and the corresponding control area can be activated by clicking on the main control interface. No other operation steps are required. After the test is completed, the sampling data in the experimental process is closed and stored, and the operator's operation steps are reduced. Increased efficiency.

Including:
1, constant temperature and humidity control device
2, constant temperature and humidity insulation test box body.
3, with 2 reinforced drying tubes.

Performance advantage of high frequency reciprocating tester for diesel lubrication evaluation of CMS-01
measurement microscope: measurement microscope has three sets of observation grinding system, each set of measurement system can be separately measured, and stored in the computer long-term preservation; The first set uses the eyepiece for observation, the second set uses the microscope's own screen for speckle observation, and the third set is to take photos of the speckle and observe the data on the computer monitor through measurement software; The microscope carrier can perform X and Y readings in both directions. At the same time, the Japanese Sanfeng digital differential reading counter is used to measure the data and the measurement accuracy is 1 μm. The measurement microscope fully meets the requirements of the latest version of the international diesel lubricating high-frequency reciprocating test machine method(HFRR),(standard number: ISO 12156.1-2018) for measuring microscope method A.