- 814
- 产品价格：699.00 元/套 起
- 发货地址：山东潍坊潍城区 包装说明：不限
- 产品数量：9999.00 套产品规格：不限
- 信息编号：171593968公司编号：14582956
- 王振友 经理 微信 18053628930
- 进入店铺 在线留言 QQ咨询 在线询价
鞍山销售消防箱箱体生产线
- 相关产品：
消火栓箱自动生产线是炜桦一直下功夫开发的设备，一直着力于将设备自动化开发到世界的**。目前消火栓箱自动生产线一次成型，出来就是一个冲好孔折好的框体，平均一小时可生产100个箱体。经过我公司不懈努力，现在的消火栓箱自动生产线也可以用作下料线，可以生产门板，背板和安装板，所有的切角和孔全部完成，下来用折弯机折下即可。这样一套设备即可用作下料线也可作为框体生产线，对于企业是个利好的消息。
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
1．放料机：用于存入放卷料并给成形部分提供板料，5吨电动放料机液压张紧。
1. Feeder: Used for storing coil and supplying sheet metal to forming part, hydraulic tension of 5 ton electric feeder.
2．整平机：9辊精密整平（上4下5），2.2KW电动送料，用于卷料平直并消除材料应力。
2. Leveling machine: 9 rolls precision leveling (top 4 down 5), 2.2KW electric feeding, used for coiling straightening and eliminating material stress.
3．伺服送料机：含2KW伺服系统，精密送料器，冲孔装置（模具）和切断装置。
3. Servo feeder: including 2KW servo system, precision feeder, punching device (die) and cutting device.
2．成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
2. Forming main frame: The main frame of this production line is welded with 100*100*3MM square steel, the frame is fixed with integral archway, the side plate is 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the feeding part adopts torsion adjustment, the main frame is good in steel and the structure is stable.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
生产线主要技术参数：
Main technical parameters of production line:
材料规格：Q235冷轧带钢，镀锌带钢
Material Specification: Q235 Cold Rolled Strip, Galvanized Strip
材料厚度：0.6→1.2mm（可定制）
Material thickness: 0.6 1.2mm (customizable)
生产速度：2只/分钟
Production speed: 2 per minute
生产规格：箱体大小：250*300--800*1000；（可定制）
Production Specification: Box Size: 250*300-800*1000; (Customizable)
箱子深度：160/180/200/250（可定制）
Box depth: 160/180/200/250 (customizable)
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
气源：0.5m3/Min；压力为0.7MPa
Gas source: 0.5m3/Min; pressure: 0.7MPa
液压油型号：46#液压油
Hydraulic Oil Type: 46 # Hydraulic Oil
齿轮油型号：18#齿轮油
Gear Oil Type: 18 # Gear Oil
轧辊材质：Cr12数控加工 ；淬火处理硬度HRC58°-60°
Roll material: Cr12 numerical control processing; hardness of quenching treatment HRC58 - 60.
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
总电机功率：25kw
Total motor power: 25 kW
切断模具材质： Cr12MoV
Cutting Die Material: Cr12MoV
传动模式：齿轮箱
Drive mode: gearbox
切断方式：液压切断
Cut-off mode: hydraulic cut-off
切断尺寸公差：≤ ±0.5mm（长≤1000mm）
Cut-off dimension tolerance: <0.5mm (length <1000mm)
操作系统：触摸屏人机界面操控
Operating System: Man-machine Interface Control of Touch Screen
电气控制：三菱PLC程序控制
Electrical control: Mitsubishi PLC program control
占地空间： 20*2*3米（长×宽×高）
Coverage space: 20*2*3 m (length width height)
电器柜成型机，配电箱外框冲孔折弯一次成型设备“炜桦冷弯”我们更专业
Electrical cabinet forming machine, one-time forming equipment for punching and bending the outer frame of distribution box "cold bending of birch" we are more professional
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
1．放料机：用于存入放卷料并给成形部分提供板料，5吨电动放料机液压张紧。
1. Feeder: Used for storing coil and supplying sheet metal to forming part, hydraulic tension of 5 ton electric feeder.
2．整平机：9辊精密整平（上4下5），2.2KW电动送料，用于卷料平直并消除材料应力。
2. Leveling machine: 9 rolls precision leveling (top 4 down 5), 2.2KW electric feeding, used for coiling straightening and eliminating material stress.
3．伺服送料机：含2KW伺服系统，精密送料器，冲孔装置（模具）切断装置。
3. Servo feeder: including 2KW servo system, precision feeder, punching device (die) cutting device.
2．成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
2. Forming main frame: The main frame of this production line is welded with 100*100*3MM square steel, the frame is fixed with integral archway, the side plate is 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the feeding part adopts torsion adjustment, the main frame is good in steel and the structure is stable.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：1.0~2.0 mm
Strip thickness: 1.0-2.0 mm
钢带宽度：≤500mm,
Width of steel band: <500 mm,
轧辊材质：GCr15 淬火HRC58°-62°
Roll Material: GCr15 Quenched HRC58 Degree-62 Degree
液压油型号：46#液压油
Hydraulic Oil Type: 46 # Hydraulic Oil
齿轮油型号：18#齿轮油
Gear Oil Type: 18 # Gear Oil
总电机功率：27kw
Total motor power: 27 kw
液压系统功率：3kw
Hydraulic system power: 3kw
大承重钢带：3吨
Maximum load-bearing steel strip: 3 tons
主要轧辊数量：18
Number of main rolls: 18
切断尺寸公差：≤ ±0.5mm（长≤3000mm）
Cut-off dimension tolerance: <0.5mm (length <3000mm)
切断模具材质： Cr12MoV
Cutting Die Material: Cr12MoV
气源：0.5m³/Min；压力为0.7MPa
Gas source: 0.5m_/Min; pressure 0.7MPa
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
Forming machine: The main frame of this production line is welded with 100*100*3MM square steel, the frame adopts integral fixed archway, the side plate adopts 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the discharging part adopts torsion up and down adjustment, the main machine has good steel and stable structure.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
4．托料架：此装置在成型机的后面，根据产品长度的不同合理排布。
4. Bracket: The device is arranged reasonably in the back of the forming machine according to the length of the product.
5．电控系统：整条生产线采用集中控制，元件采用进口及国产上等优质产品，或由客户*，标准件元件采用闽台品牌。设备电控元件的安装符合国家规定，线号清晰。
5. Electronic control system: The whole production line adopts centralized control. The components are imported and domestic high-quality products, or designated by customers. The standard components are made of Taiwan brand. The installation of the electronic control components of the equipment conforms to the national regulations, and the line number is clear.
操作系统：触摸屏
Operating System: Touch Screen
控制方式：PLC
Control mode: PLC
传动模式：齿轮箱
Drive mode: gearbox
材料规格：Q235
Material Specification: Q235
生产速度：0-15m
Production speed: 0-15m
切断方式：液压切断
Cut-off mode: hydraulic cut-off
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：0-6mm
Strip thickness: 0-6mm
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
1．放料机：用于存入放卷料并给成形部分提供板料，5吨电动放料机液压张紧。
1. Feeder: Used for storing coil and supplying sheet metal to forming part, hydraulic tension of 5 ton electric feeder.
2．整平机：9辊精密整平（上4下5），2.2KW电动送料，用于卷料平直并消除材料应力。
2. Leveling machine: 9 rolls precision leveling (top 4 down 5), 2.2KW electric feeding, used for coiling straightening and eliminating material stress.
3．伺服送料机：含2KW伺服系统，精密送料器，冲孔装置（模具）和切断装置。
3. Servo feeder: including 2KW servo system, precision feeder, punching device (die) and cutting device.
2．成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
2. Forming main frame: The main frame of this production line is welded with 100*100*3MM square steel, the frame is fixed with integral archway, the side plate is 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the feeding part adopts torsion adjustment, the main frame is good in steel and the structure is stable.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
生产线主要技术参数：
Main technical parameters of production line:
材料规格：Q235冷轧带钢，镀锌带钢
Material Specification: Q235 Cold Rolled Strip, Galvanized Strip
材料厚度：0.6→1.2mm（可定制）
Material thickness: 0.6 1.2mm (customizable)
生产速度：2只/分钟
Production speed: 2 per minute
生产规格：箱体大小：250*300--800*1000；（可定制）
Production Specification: Box Size: 250*300-800*1000; (Customizable)
箱子深度：160/180/200/250（可定制）
Box depth: 160/180/200/250 (customizable)
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
气源：0.5m3/Min；压力为0.7MPa
Gas source: 0.5m3/Min; pressure: 0.7MPa
液压油型号：46#液压油
Hydraulic Oil Type: 46 # Hydraulic Oil
齿轮油型号：18#齿轮油
Gear Oil Type: 18 # Gear Oil
轧辊材质：Cr12数控加工 ；淬火处理硬度HRC58°-60°
Roll material: Cr12 numerical control processing; hardness of quenching treatment HRC58 - 60.
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
总电机功率：25kw
Total motor power: 25 kW
切断模具材质： Cr12MoV
Cutting Die Material: Cr12MoV
传动模式：齿轮箱
Drive mode: gearbox
切断方式：液压切断
Cut-off mode: hydraulic cut-off
切断尺寸公差：≤ ±0.5mm（长≤1000mm）
Cut-off dimension tolerance: <0.5mm (length <1000mm)
操作系统：触摸屏人机界面操控
Operating System: Man-machine Interface Control of Touch Screen
电气控制：三菱PLC程序控制
Electrical control: Mitsubishi PLC program control
占地空间： 20*2*3米（长×宽×高）
Coverage space: 20*2*3 m (length width height)
电器柜成型机，配电箱外框冲孔折弯一次成型设备“炜桦冷弯”我们更专业
Electrical cabinet forming machine, one-time forming equipment for punching and bending the outer frame of distribution box "cold bending of birch" we are more professional
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
1．放料机：用于存入放卷料并给成形部分提供板料，5吨电动放料机液压张紧。
1. Feeder: Used for storing coil and supplying sheet metal to forming part, hydraulic tension of 5 ton electric feeder.
2．整平机：9辊精密整平（上4下5），2.2KW电动送料，用于卷料平直并消除材料应力。
2. Leveling machine: 9 rolls precision leveling (top 4 down 5), 2.2KW electric feeding, used for coiling straightening and eliminating material stress.
3．伺服送料机：含2KW伺服系统，精密送料器，冲孔装置（模具）切断装置。
3. Servo feeder: including 2KW servo system, precision feeder, punching device (die) cutting device.
2．成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
2. Forming main frame: The main frame of this production line is welded with 100*100*3MM square steel, the frame is fixed with integral archway, the side plate is 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the feeding part adopts torsion adjustment, the main frame is good in steel and the structure is stable.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：1.0~2.0 mm
Strip thickness: 1.0-2.0 mm
钢带宽度：≤500mm,
Width of steel band: <500 mm,
轧辊材质：GCr15 淬火HRC58°-62°
Roll Material: GCr15 Quenched HRC58 Degree-62 Degree
液压油型号：46#液压油
Hydraulic Oil Type: 46 # Hydraulic Oil
齿轮油型号：18#齿轮油
Gear Oil Type: 18 # Gear Oil
总电机功率：27kw
Total motor power: 27 kw
液压系统功率：3kw
Hydraulic system power: 3kw
大承重钢带：3吨
Maximum load-bearing steel strip: 3 tons
主要轧辊数量：18
Number of main rolls: 18
切断尺寸公差：≤ ±0.5mm（长≤3000mm）
Cut-off dimension tolerance: <0.5mm (length <3000mm)
切断模具材质： Cr12MoV
Cutting Die Material: Cr12MoV
气源：0.5m³/Min；压力为0.7MPa
Gas source: 0.5m_/Min; pressure 0.7MPa
设备结构及系统配置：
Equipment structure and system configuration:
概述：该生产线主要由放料机、调平机、冲孔切断机、输送台、成型主机、液压折边机、成品托料装置、液压系统、电气控制部分及安全防护部分组成。
Overview: The production line is mainly composed of feeder, leveler, punch cutter, conveyor, forming machine, hydraulic folding machine, finished product supporting device, hydraulic system, electrical control part and safety protection part.
成型主机：此生产线的主机机座采用100*100*3MM方钢焊接，机架采用整体式固定牌坊，侧板采用25mm钢板，支承部分均采用优质闽台轴承，进料采用滚轮式，出料采用扭动上下调节，主机钢性好，且结构稳定。
Forming machine: The main frame of this production line is welded with 100*100*3MM square steel, the frame adopts integral fixed archway, the side plate adopts 25mm steel plate, the supporting part adopts high-quality Taiwanese bearings, the feeding part adopts roller type, the discharging part adopts torsion up and down adjustment, the main machine has good steel and stable structure.
B:滚压模具（轧辘）：16组辊轮成型，均采用优质Gr12模具钢，HRC达58~60o均采用精密数控机床加工，精度为6~7级，表面粗糙度达0.8 以上，成形尺寸精确，成形工件表面无划伤。
B: Rolling dies (rollers): 16 groups of rollers are formed with high quality Gr12 die steel, HRC up to 58~60o are processed with precision CNC machine tools, accuracy is 6~7 grades, surface roughness is more than 0.8, forming dimension is accurate, no scratches on the surface of the formed workpiece.
C:传动部分：是生产线成形动力的输送部分，其动力由主电机到减速箱，再由减速箱通过齿轮传送到主动轮上，主动轮通过过度齿轮传动，使得上下轧辘同步转动。
C: Driving part: It is the conveying part of the forming power of the production line. Its power is transferred from the main motor to the reducer, and then from the reducer to the driving wheel through gears. The driving wheel is driven by excessive gears, so that the upper and lower rollers rotate synchronously.
3．定长折弯部分：由定长装置及折弯机构组成。定长装置是通过激光探头结合编码器定长，当板料走到定尺长度时，通过PLC控制折弯产品。
3. Fixed length bending part: It consists of fixed length device and bending mechanism. The fixed length device is fixed by laser probe combined with encoder. When the sheet reaches the fixed length, the bending product is controlled by PLC.
4．托料架：此装置在成型机的后面，根据产品长度的不同合理排布。
4. Bracket: The device is arranged reasonably in the back of the forming machine according to the length of the product.
5．电控系统：整条生产线采用集中控制，元件采用进口及国产上等优质产品，或由客户*，标准件元件采用闽台品牌。设备电控元件的安装符合国家规定，线号清晰。
5. Electronic control system: The whole production line adopts centralized control. The components are imported and domestic high-quality products, or designated by customers. The standard components are made of Taiwan brand. The installation of the electronic control components of the equipment conforms to the national regulations, and the line number is clear.
操作系统：触摸屏
Operating System: Touch Screen
控制方式：PLC
Control mode: PLC
传动模式：齿轮箱
Drive mode: gearbox
材料规格：Q235
Material Specification: Q235
生产速度：0-15m
Production speed: 0-15m
切断方式：液压切断
Cut-off mode: hydraulic cut-off
电压参数：380V/415V，50Hz, 3相
Voltage parameters: 380V/415V, 50Hz, 3-phase
电气控制：PLC
Electrical control: PLC
驱动电机：变频电机驱动
Driving motor: variable frequency motor drive
钢带厚度：0-6mm
Strip thickness: 0-6mm
